AAC Production line

AAC Production line 1.potential industry in the near future 2.easy operating. 3. low invest, high profit 4.mature technology

AAC Production Line 

As an important component of wall material innovation and building energy saving, aerated block is a kind of ideal wall material through over years of application and certified by practice instead of clay brick.   Aerated concrete block takes siliceous material (coal ash or sand) and calcium material (cement and lime) as main raw materials. It adulterates appropriate adjusting material (gypsum) and a little of gas forming material (aluminum paste). It is a kind of new wall material made through raw material treatment,ingredient mixing, quiet stop cutting and steam curing. It can be made into the blocks of various specifications. The following is the detail information of aac production line.

Descriptions of Production Process of Aerated Concrete Block

1. Treatment of Raw Materials → 2. Ingredient pouring→ 3. Cutting → 4. Steam curing

Features of Production Process of Aerated Concrete Block Equipment 

 

 

1. Fixed-point pouring  Adopting fixed-point pouring saves the factory building area, convenient for centralized control. It is safe and sanitary during operation. Movable pouring occupies large area, needs many factory buildings, and is not favorable for centralized control, not easy to clean. And there is potential safety hazard during production. The process also can adopt fixed-point pouring and movable discharging mold. It not only can save factory building area, be convenient for centralized control and safe and sanitary during operation, but also solve the disadvantages of fixed pouring, such as post-pouring hardening first, failure to cut, etc.

  2. Mechanical cutting

Adopt the overturning cutting machine with the advanced domestic level. The machine can cut six faces of the base, and the cut overall dimension is accurate and appearance is beautiful, and it reaches even exceeds national standard.

3. Full automatic centralized control  The technology is controlled by electronic scale from ingredient batching to pouring, with high automation degree and advanced production process.

4. Large space design of factory building  Adopt large-space factory building, spacious and bright, convenient for management, saving investment.

5. Adopt pre-curing before cutting  Before cutting, adopt quiet stop room for hot chamber curing, which not only quickens the hardening of the base, reduces the quiet stop time of the base, improves the production efficiency, but also the base has uniform development, good aerated structure, high product strength and good freezing resistance. Meanwhile, it is convenient for production in winter, and it will not cause hard center and soft surrounding because of environment temperature difference

6. Adopt pre-curing before steam curing

Before steam curing, adopt pre-curing. During steam curing, adopt rapid pressure rising to shorten steam curing time, improve production efficiency. Meanwhile, the manufactured product is not cracked, and the finished product ratio is high.

7. Use both vacuumization process and degassing process

 In the process of steam curing, vacuumization process and degassing process are different, and they have their own advantages and disadvantages. The two processes are considered in design for choice by customer.

AAC Production line